Additional information
| Number of Lites | 1 Lite, 3 Lite |
|---|---|
| Glass Thickness | 1 Inch, 1/2 Inch, 1/8 Inch |
| Door Thickness | 1 1/2 Inches, 1 3/4 Inches |
| Type | Exterior, Interior, Screwless |
| Material | PC/ABS, Polypropylene |
| Color | Tan, White |
| Number of Lites | 1 Lite, 3 Lite |
|---|---|
| Glass Thickness | 1 Inch, 1/2 Inch, 1/8 Inch |
| Door Thickness | 1 1/2 Inches, 1 3/4 Inches |
| Type | Exterior, Interior, Screwless |
| Material | PC/ABS, Polypropylene |
| Color | Tan, White |
Traditional Colonial profile design with matching, self-aligning screw plugs.
UV resistant materials prevent frame from yellowing.
Polypropylene material for moderate-heat areas.
PC/ABS material for high-heat areas.
Frame does not need to be finished, which eliminates the cost associated.
Adhesion promoter is required for Polypropylene material, if painting or staining.
PC/ABS material is easily painted or stained, without the need of adhesion promoter.
Simulated Divided Lite (SDL) Fixed Grilles are molded as part of the Door Lite Frame creating one complete part.
See our Door Lite Frame Size Calculator page to determine your frame size and glass thickness.
Glass Dimensions: The listed size refers to the dimensions of the glass that fits within the door lite frame.
Door Cut Out Dimensions: The door cut out dimensions are approximately 1″ larger than the glass size. This ensures that there is enough space to accommodate the frame and allows for a proper installation.
Frame Inside Dimensions: The inside dimensions of the door lite frame are approximately 1″ smaller than the glass size.
Frame Outside Dimensions: The outside dimensions of the door lite frame are roughly 2″ larger than the glass size.
Other Dimensions:
Standard door thickness is 1-3/4″.
Decorative glass, it is typically 1″ thick, although occasionally it may be 1/2″ thick.
Clear insulated glass units can have a thickness of either 1/2″ or 1″.
For clear non-insulated flat glass, the standard thickness is 1/8″.
Please note that these measurements are general guidelines, and slight variations may exist.
| Part Number | Number of Lites | Glass Thickness | Door Thickness | Type | Material | Color |
|---|
Part Number | Number of Lites | Glass Thickness | Door Thickness | Type | Material | Color |
|---|---|---|---|---|---|---|
| 836-1-1-4-I-PP-W | 1 Lite | 1" | 1 3/4" | Interior | Polypropylene | White |
| 836-1-1-4-E-PP-W | 1 Lite | 1" | 1 3/4" | Exterior | Polypropylene | White |
| 836-1-1-4-S-PP-W | 1 Lite | 1" | 1 3/4" | Screwless | Polypropylene | White |
| 836-1-5-4-I-PP-W | 1 Lite | 1/2" | 1 3/4" | Interior | Polypropylene | White |
| 836-1-5-4-E-PP-W | 1 Lite | 1/2" | 1 3/4" | Exterior | Polypropylene | White |
| 836-1-5-4-S-PP-W | 1 Lite | 1/2" | 1 3/4" | Screwless | Polypropylene | White |
| 836-1-8-4-I-PP-W | 1 Lite | 1/8" | 1 3/4" | Interior | Polypropylene | White |
| 836-1-8-4-E-PP-W | 1 Lite | 1/8" | 1 3/4" | Exterior | Polypropylene | White |
| 836-1-8-4-S-PP-W | 1 Lite | 1/8" | 1 3/4" | Screwless | Polypropylene | White |
| 836-1-8-5-I-PP-W | 1 Lite | 1/8" | 1 1/2" | Interior | Polypropylene | White |
